Using the Imager, con’t

Display Layout

The a50 & z50  Display Layout view with labeling

Back to Top

Blank Screen

blankscreen

Blank Screen with no Temperature Cursors

L/S indicates the imager is in manual range selection mode.  In the above image, the range is 75°F to 82°F.

Calibrating indicates that the imager is in the process of its periodic array refresh process.  All camera functions are frozen during this quick operation.

*The time interval for the array refresh is settable.

Back to Top

Digital Zoom

Digital zoom is activated by pressing the up or down navigation buttons.  Activating the 2x digital zoom makes the pixels twice as large, showing only the center of the array.  When active, the imager in x2 mode is now a 80 x 60 resolution imager versus a 160 x 120 resolution in x1 mode.

x2 on the top of the screen on the right hand image indicates the 2 times digital zoom is activated

The target in these photos are two cups at the end of a table, one filled with hot liquid and the other filled with cold liquid. x2 on the top of the screen on the right hand image indicates the 2 times digital zoom is activated

Back to Top

Palette Selection

paletteselection

Palette selection is shown on the lower right hand portion of the screen.

Using the button, highlight (outline in yellow) the color temperature bar at the bottom of the screen.  Using the Left or Right navigation buttons, select from 9 color and 2 black & white palettes.

listofpalettes

Popular Palette Examples

Popular Palette Examples

Back to Top

<< Previous | Next >>

Learn more about our other products at www.palmerwahl.com

Comments are closed.