Fever Alert Temperature Screening Kiosk
Fever Alert Temperature Screening Kiosk
The Fever Alert temperature screening terminal includes facial recognition technology, and can be used to prevent or allow access to restricted areas. Face mask detection feature determines if the individual is wearing a mask and prompts the user to put one on before being allowed to enter. Optimal measurement distance is 1.6 to 5 feet (0.5 to 1.5 meters).
This 25Hz model is available for sale and shipment in the USA only due to government restrictions. 25Hz Transaction Information Form must be signed and returned before order can be completed. Please call us at 1-800-421-2853 to order.
The Hikvision Temperature Screening Kiosk is an access control device that integrates high accuracy temperature screening with the use of thermal imaging technology.
The Hikvision DS-K1T671TM-3XF is ideal for automated scanning individuals for elevated temperatures, without an attendant present. Optimal measurement distance is 1.6 to 5 feet (0.5 to 1.5 meters).
This model offers access control via facial recognition, identity card, and temperature. Choose any combination to control access to your location. Connects to a secure door via RS-485 protocol, and to external access controller (or Wiegand card reader) via Wiegand protocol. Terminal transmits information to the client software via TCP/IP for remote monitoring using the DS-KC001 Terminal Monitoring Tablet (sold separately).
Use the fast temperature measurement mode to detect a face and take a temperature without identity authentication. Face mask detection feature recognizes if the user is wearing a face mask, and if not, prompts the user to put one on before proceeding.
When facial recognition is enabled, recogntion takes less than 0.2 seconds per user, with a facial accuracy rate of greater than 99%. Unit can store up to 50,000 faces for recognition purposes.
Includes wall mounting bracket. For temporary installations, or where wall mounting is not possible, Floor Stand is available separately.
Important Notes
-In order to get an accurate temperature reading, wait 90 minutes for the device to warm up after it is powered on.
-Warning: Do not expose this equipment to direct sunlight, low ventilation, or a heat source such as a heater or radiator (ignoring this warning can cause fire danger).
-Biometric recognition products are not completely immune from spoofing. If you require a higher security level, use multiple authentication modes.
-This is not a medical device. This unit is designed as a preliminary screening tool to determine if further medical testing may be worthwhile.
Use Fever Alert Forehead Thermometers for further verification.
Additional information
| Operating System | Linux |
|---|---|
| Sensor | Vanadium oxide uncooled sensor |
| Resolution | 120 x 160 |
| Frame Rate | 25 fps |
| Temperature Range | 86° to 113° F (30° to 45° C) |
| Temperature Accuracy | ±0.9° F (±0.5° C) without black body calibration |
| Measuring Distance | 1.6 ft to 5 ft (0.5 m to 1.5 m) |
| Dimensions | 11.13 inches x 4.59 inches x 1.44 inches ( 282.78 mm x 116.5 mm x 36.7 mm) |
| Screen | 7 inch touch screen |
| Screen Ratio | 16:9 |
| Screen Resolution | 1024 × 600 |
| Camera | 2 MP dual-lens camera, WDR |
| Facial Recognition Mode | Face: 1:1 and 1:N |
| Facial Storage Capacity | 50,000 |
| Time to Facial Recognition | ＜0.2 s per person |
| Facial Recognition Distance | 1.6 ft to 5 ft (0.5 m to 1.5 m) |
| Card Capacity | 50,000 |
| Card Type | M1 card |
| Time to read card | <1 sec |
| Card reading distance | 0 to 1.97 inches (0 cm to 5 cm) |
| Interface | 1 – Network |
| Network | 10/100/1000 Mbps self-adaptive |
| Tamper Resistant | Yes |
| Working Voltage | 12 VDC/2 A |
| Working Temperature / Humidity | Working temperature: 32° to 122° F (0° to 50° C) indoor and windless environment use only. |
| Mounting | Wall mount included with purchase. Floor stand sold separately. |
Reviews
There are no reviews yet.